Part of the StarStrand accessory offering is the StarStrand Rough-In Terminal Block. The Rough-In Terminal Block allows a StarStrand LED Tape Lighting System to be installed using existing low voltage cable or extension wire (i.e. Romex) or new low voltage cable or extension wire installed during new construction. The Rough-In Terminal Blocks are only to be used with low voltage. For StarStrand this is 12V or 24V. Rough-In Terminal Blocks can be used to bring power from a StarStrand Driver to StarStrand LED Tape or StarStrand Controller or connect two segments of StarStrand LED Tape or StarStrand Channel Star 24 together.

Each StarStrand Rough-In Terminal Block includes:

  • 3" lead with a female connector
  • StarStrand Male-to-Male Adapter
  • Quick connect terminal block
  • Clear acrylic housing
  • Installation screw

The quick connect terminal block can handle low voltage cable or extension wire (i.e. Romex) up to 14 gauge.

There are four different version of the StarStrand Rough-In Terminal Block. Make sure to select the right model to match your StarStrand LED Tape Lighting System installation.

Image Item/Description Compatible Systems Wiring Notes
53257
StarStrand 4-Pin Rough-In Terminal Block
Basic Star
Ultra Star
Super Star
Requires two (2) low voltage cables or extension wires.
53382
StarStrand Channel Star 24 4-Pin Rough-In Terminal Block
Channel Star 24 3500 K
Channel Star 24 5000 K
Requires two (2) low voltage cables or extension wires.
53383
StarStrand RGB 4-Pin Rough-In Terminal Block
Color Flex Star 24
Rainbow Star
Rainbow Star 24
Rainbow Channel Star 24
Requires four (4) low voltage cables or extension wires.
53258
StarStrand 6-Pin Rough-In Terminal Block
Elite Star 24
Solar Star 24
Super Star 24
Ultima Star 24
Ultra Star 24
Requires two (2) low voltage cables or extension wires.