Part of the StarStrand accessory offering is the StarStrand Rough-In Terminal Block. The Rough-In Terminal Block allows a StarStrand LED Tape Lighting System to be installed using existing low voltage cable or extension wire (i.e. Romex) or new low voltage cable or extension wire installed during new construction. The Rough-In Terminal Blocks are only to be used with low voltage. For StarStrand this is 12V or 24V. Rough-In Terminal Blocks can be used to bring power from a StarStrand Driver to StarStrand LED Tape or StarStrand Controller or connect two segments of StarStrand LED Tape or StarStrand Channel Star 24 together.

Each StarStrand Rough-In Terminal Block includes:

• 3" lead with a female connector
• StarStrand Male-to-Male Adapter
• Quick connect terminal block
• Clear acrylic housing
• Installation screw

The quick connect terminal block can handle low voltage cable or extension wire (i.e. Romex) up to 14 gauge.

There are four different version of the StarStrand Rough-In Terminal Block. Make sure to select the right model to match your StarStrand LED Tape Lighting System installation.

Image		Item/Description		Compatible Systems		Wiring Notes
		53257 StarStrand 4-Pin Rough-In Terminal Block		Basic Star Ultra Star Super Star		Requires two (2) low voltage cables or extension wires.
		53382 StarStrand Channel Star 24 4-Pin Rough-In Terminal Block		Channel Star 24 3500 K Channel Star 24 5000 K		Requires two (2) low voltage cables or extension wires.
		53383 StarStrand RGB 4-Pin Rough-In Terminal Block		Color Flex Star 24 Rainbow Star Rainbow Star 24 Rainbow Channel Star 24		Requires four (4) low voltage cables or extension wires.
		53258 StarStrand 6-Pin Rough-In Terminal Block		Elite Star 24 Solar Star 24 Super Star 24 Ultima Star 24 Ultra Star 24		Requires two (2) low voltage cables or extension wires.